A faulty door lock can be frustrating especially if it happens as unexpectedly as it always does. When your door locks become faulty, it is a widespread thought that broken door locks deserve nothing than a replacement as they are quite difficult to fix and could become safety risks.
This may be true in some instances especially those where a lock has been broken totally and has encountered much damage that makes it unsalvageable. In cases like this, getting a replacement may be inevitable. Other times, a simple workaround of the components may be the key to restoring it to its working state. Many factors also contribute to the actions to be taken in terms of faulty door locks such as the credibility of the locks, the extent of damage, the cost of repair to the cost of replacement.
Irrespective of the type of lock installed and the other factors that may make your situation unique, here are 5 ways you can try to solve the issue on your own.
Many issues arise including the bolting systems of locks. In fact, this reason is one of the most common issues for faulty door locks, second only to the lack of lubrication. Locks may be faulty due to a busted latch bolt or due to a broken deadbolt. Whatever the case may be, these types of faults are not unusual considering the length of the metal parts involved in a lock mechanism.
The actuating mechanisms of the lock may be disrupted and forceful attempts to enter can also lead to the bending of these metals. Jams may also occur due to the dislodgement of the springs in the lock and turn mechanisms. When taking a closer look, make sure that these bolts extend and retract and clear out any form of dirt or debris that may be holding the bolt.
The alignment refers to the relationship between the door lock and the jam or the strike plate. There are instances where the fault is wrongly evaluated as a broken lock. To determine which of the issues the case is, you will need to do a little diagnosis by opening the affected door, unlock and then re-lock. If you find this to work very smoothly, close the door and repeat the process.
If the lock is misaligned, you will experience a reduction in the extent to which the lock is useable when the door is shut while in the case of a broken lock, you’d experience a difficulty in getting the door to work perfectly in both states or in one state over the other. Misaligned locks may not necessarily need replacement and may simply need to be realigned to get it back in shape.
Fixing a keyway issue can be a daunting task to say the very least. There are two main challenges in evaluating keyway issues. First of all, assessing the keyhole is challenging because of the small size in the door lock and the dark conditions. Secondly, the keyway is one of the more complicated parts of the door lock and may require some technical knowhow. To get started, check if you can insert the key and how far the key can go.
Make sure you can fit the key in up to the shoulder to verify that nothing is in the keyhole. If the key fits, then the case is most likely a result of some worn out internal components. Should the key not fit, you may need to look closer and examine the lock for some sort of damages or disturbances that may be affecting the key entry and exit mechanism in the keyway.
Lubrication is the most common problems experienced in most door locks. It is not unusual to see door locks become stiff and unresponsive due to the dryness and lack of lubrication. Lubrication is important to ensure smooth aligning and movement of the internal components of the lock or the keys placed in them.
To improve the lubrications mechanisms, simply apply some lubricant on the bolts and latches, and if you can uncouple the locks, apply some of the lubricants to the parts to allow stuck parts to bring them back to life. Lubricants can be dry or oil-based and one or two sprays on these parts can work wonders. In cases where you don’t have a lubricant immediately available, try to use some engine oil or any other oil available.
When all attempts to correct the above-listed faults which could be responsible for the broken lock fails, the reasonable solution is to reach out to a professional locksmith in Orlando. A professional locksmith in Orlando will help you make repairs or completely replace the door lock based on the severity of damage and how far the door is salvageable.
Even when a DIY approach is taken, it is still very important to seek the services of a professional locksmith in Orlando. Leaving your faulty door lock unattended leaves you open to the potential risks of theft and break-ins. To ensure security, quickly evaluate the possible issues with your door lock and call a professional locksmith in Orlando for a detailed and quality service.
Professional Locksmith services in Orlando are always available to provide you with the best possible repair and maintenance services to ensure that your door lock is properly fixed and returns to its satisfactory working state.
If you simply do not want to fix your current lock out of fear that it is already compromised, speak to your locksmith about a new variety of security options including smart and digital locks that offer more versatility and convenience options.
A-Rudi Cuellar Lock Company is one of the most highly recommended locksmith companies in Orlando and guarantees you professional services and exceptional after-sales maintenance and check-up at all times.
Call us today or send an email to request for a free consultation.
